EC 5000 ø 50 mm, cylindrical, IP54, for 0 to 40 °C
Application areaDrive for unit handling conveyor systems, such as transporting cardboards, containers, workpiece carriers or tires at normal ambient temperature. Suitable for straight conveyors, small belt conveyors and especially zero-pressure accumulation conveyors. Also usable in shuttle systems, aligning conveyor segments or transfers to other "conveyor system branches".
Compact designThe motor integrated in the tube allows a very compact design of the conveyor system.
Very energy-efficientThe brushless drive features an energy recovery in braking. The conveyor system can operate without pneumatics or conventional drives, which must be operated continually.
Flexible possible applicationsRollerDrive is available in all types of versions, allowing it to be used in all types of different conveyor systems. For the user, this translates into a single interface instead of many. Depending on the application area, PolyVee, round or toothed belts can be used for the transmission of force. Nine gear ratios allow selecting the perfect pairing between speed and torque. The electronic holding brake (Zero-Motion-Hold) holds conveying goods in position, even on gravity conveyors.
Low-noiseThe use of decoupling elements achieves particularly low-noise running.
Maintenance-free and installation-friendlyThe drive with internal commutation electronics does not require any maintenance. It features an overload protection that prevents damages due to overtemperature or blockage. It is connected securely without complex screw connection by using a motor cable with 5-pin snap-in plug.
| Rated voltage | 24 V | 24 V | 24 V | 48 V | 48 V | 48 V |
|---|---|---|---|---|---|---|
| Power | 20 W | 35 W | 50 W | 20 W | 35 W | 50 W |
| Rated current | 1.4 A | 2.4 A | 3.4 A | 0.7 A | 1.2 A | 1.7 A |
| Starting current | 3.0 A | 5.5 A | 7.5 A | 1.5 A | 2.8 A | 3.8 A |
| Max. noise emission (mounted) | 55 dB(A), application-dependent | |||||
| Length of motor cable | 500 mm | |||||
| Max. reference length | 1500 mm | |||||
| Ambient temperature in operation | 0 to +40 °C | |||||
| Motor shaft | Stainless steel, 11 mm HEX, thread M12 x 1 | |||||
| Anti-static version | Yes (< 10⁶ Ω) | |||||
| Tube wall thickness | ø 50 mm: 1.5 mm ø 51 mm: 2 mm |
|||||
| Tube material | Zinc-plated steel, stainless steel | |||||
| Tube sleeve | PVC sleeve 2 mm, 5 mm PU sleeve 2 mm Lagging 2 to 5 mm |
|||||
The maximum load capacity of the RollerDrive EC5000 depends on the drive head and the length of the RollerDrive.
| Length of RollerDrive | ≤ 1000 mm | 1100 mm | 1200 mm | 1300 mm | 1400 mm | 1500 mm |
| Maximum load capacity per RollerDrive without drive head |
1100 N | 925 N | 750 N | 650 N | 550 N | 475 N |
| Maximum load capacity per RollerDrive with drive head (PolyVee, round or toothed belt) |
350 N | |||||
Before the run-in, the values may differ up to ±20 %. After a run-in phase, the values vary only in the range of ±10 % for 95 % of all RollerDrive used.
20 W
| Gear ratio | Maximum conveying speed [m/s] | Minimum conveying speed [m/s] | Rated torque [Nm] | Acceleration torque [Nm] | Continuous blocking torque [Nm] |
|---|---|---|---|---|---|
| 9:1 | 2.01 | 0.09 | 0.25 | 0.63 | 0.63 |
| 13:1 | 1.39 | 0.06 | 0.36 | 0.91 | 0.91 |
| 18:1 | 1.00 | 0.04 | 0.50 | 1.26 | 1.26 |
| 21:1 | 0.86 | 0.04 | 0.59 | 1.47 | 1.47 |
| 30:1 | 0.60 | 0.03 | 0.85 | 2.13 | 2.13 |
| 42:1 | 0.43 | 0.02 | 1.18 | 2.95 | 2.95 |
| 49:1 | 0.37 | 0.02 | 1.37 | 3.44 | 3.44 |
| 78:1 | 0.23 | 0.01 | 2.02 | 5.43 | 5.43 |
| 108:1 | 0.17 | 0.01 | 2.82 | 7.57 | 7.57 |
35 W
| Gear ratio | Maximum conveying speed [m/s] | Minimum conveying speed [m/s] | Rated torque [Nm] | Acceleration torque [Nm] | Continuous blocking torque [Nm] |
|---|---|---|---|---|---|
| 9:1 | 2.01 | 0.09 | 0.44 | 1.11 | 1.11 |
| 13:1 | 1.39 | 0.06 | 0.64 | 1.60 | 1.60 |
| 18:1 | 1.00 | 0.04 | 0.89 | 2.22 | 2.22 |
| 21:1 | 0.86 | 0.04 | 1.04 | 2.59 | 2.59 |
| 30:1 | 0.60 | 0.03 | 1.49 | 3.74 | 3.74 |
| 42:1 | 0.43 | 0.02 | 2.07 | 5.18 | 5.18 |
| 49:1 | 0.37 | 0.02 | 2.42 | 6.04 | 6.04 |
| 78:1 | 0.23 | 0.01 | 3.55 | 9.54 | 9.54 |
| 108:1 | 0.17 | 0.01 | 4.95 | 13.00 | 13.00 |
50 W
| Gear ratio | Maximum conveying speed [m/s] | Minimum conveying speed [m/s] | Rated torque [Nm] | Acceleration torque [Nm] | Continuous blocking torque [Nm] |
|---|---|---|---|---|---|
| 9:1 | 2.01 | 0.09 | 0.63 | 1.58 | 1.58 |
| 13:1 | 1.39 | 0.06 | 0.91 | 2.29 | 2.29 |
| 18:1 | 1.00 | 0.04 | 1.27 | 3.17 | 3.17 |
| 21:1 | 0.86 | 0.04 | 1.48 | 3.70 | 3.70 |
| 30:1 | 0.60 | 0.03 | 2.13 | 5.34 | 5.34 |
| 42:1 | 0.43 | 0.02 | 2.96 | 7.40 | 7.40 |
| 49:1 | 0.37 | 0.02 | 3.45 | 8.63 | 8.63 |
| 78:1 | 0.23 | 0.01 | 5.07 | 13.00 | 13.00 |
| 108:1 | 0.17 | 0.01 | 7.07 | 13.00 | 13.00 |
|
Minimum Installation Length |
Gear ratio | |
| 9:1 to 49:1 | 78:1 to 108:1 | |
| Female thread, no grooves | 226 mm |
241 mm |
| Hexagon spring shaft, no grooves | 261 mm |
276 mm |
| Female thread with grooves | 265 mm |
280 mm |
| Hexagon spring shaft with grooves | 285 mm |
300 mm |
| PolyVee drive head with female thread | 260 mm |
275 mm |
| PolyVee drive head with hexagon spring shaft | 283 mm |
298 mm |
| Round belt drive head with female thread | 260 mm |
275 mm |
| Round belt drive head with hexagon spring shaft | 283 mm |
298 mm |
| Toothed belt drive head with female thread | 275 mm |
290 mm |
|
DOWNLOADS |
|---|
